Sunday, March 8, 2015

Deliverable 2: Yo-Yo Preliminary Design

We were inspired to build our yo-yo from the ideas of a perpetual motion machine and an overbalanced wheel. The principle of an overbalanced wheel is to have a geometry which allows shifting weight. The weight shifting keeps the center of mass constantly off the axle, so gravity can provide a torque and continue the wheel's spinning.
This effect only happens when the yo-yo's rotational speed is small enough that the shiftable weight is not pulled out by centrifugal forces. However, we expect two benefits from this particular design. The obvious one is the overbalanced effect to take place when the yo-yo slows. But, as we are using steel balls as our weight, we also expect that when the yo-yo is spinning quickly, that these balls shift to the outside edge of the yo-yo and provide a more stable moment of inertia, increasing the "play" in our yo yo.
As a final introductory note, we chose the name "Walking the Dog" to relate the yo-yo trick of letting the body spin on its center axle to our desired feature of allowing it to spin forever (at least until friction comes into play.

The body of our yo-yo will look something like this (color choices for the spokes and snap ring are still in the air.)


The yo yo will be made of two body pieces, a snap ring, a cover, and our overbalanced wheel feature. This part has been rendered to show the balls in the configuration in which they will be while the overbalancing is in effect. The feature was inspired by previous iterations and pictures found on the internet; however, nowhere have we found this incorporated into a yoyo. 
In order to allow for our overbalanced effect to have maximal impact, we need to create a central connection with as low friction as possible: hence our bearing and washer configuration included on the central spool and nut. 
In the exploded view, we can see small dowels raised off of the yo-yo body and holes inside the spokes. This was designed to ensure a tight secure fit that will not allow motion. 
Our snap ring will fit in between the inner lip of the yo yo body and over the outer, smaller edge of the cover. 

Some more gratuitous images:

The bearing assembly

Exploded View

Side View

The yo-yo body will be injection molded. The snap rings and the spokes will also be injection molded. The outer casing cover will be thermoformed. The bearing assembly(all) and the steel balls will be purchased.

Design for manufacturing was crucial in our creative process to ensure that we will have pristine parts. The yo-yo body was drawn with a draft angle on its outer side to ensure ease of removal. It has rounded edges to avoid cornering issues. The attachment location between the spokes and the body allows for an easy ejector pin configuration. The series of spokes that attach to the body and hold the balls in place have been designed with rounded edges and a generally circular geometry to avoid the issues of sharp corners. We believe that the circular version of the overbalanced wheel spikes can lead to greater strength of molded plastic. The snap ring has filleted edges and is in a circular form. The thermoformed cover has a draft angle for ease of removal and its corners will also be slightly rounded to prevent stress concentrations.






The assembled Yo-Yo, including ball bearings, will weigh 0.13 pounds, and is expected to rotate at around 1200 RPM. The estimated rotational speed was achieved by transferring the energy of potential in a 1m drop to rotational energy. This method neglects energy spent in translation, but also assumes that the Yo-Yo is dropped and not thrown. In order to maximize spin velocity, the Yo-Yo was designed with a relatively large string gap of 0.13 inches




Wednesday, February 25, 2015

Team Introduction

Hi! We're the 2.008 team of Nico, Langston, Brad, Emilee, Natasha, Nate, Valerie and KK. We're working over the course of the term to manufacture 100 yo-yos, by injection molding, thermoforming and machining our parts. Our idea is to create a perpetual motion machine yo-yo using a structure of bearings, so that the yo-yo can continue to spin in a walking-the-dog position. A quick introduction to who we are:
Nico - Course 2 from EC and likes to build things.
Langston - Course 2 and dances too much
Brad - Course 16 who just likes yo-yos
Emilee - Lives in Senior Haus, going to be a marine
Natasha - A senior in course 2 and 20, and has no sense of smell
Nate - Course 2A with Electrical Engineering, and plays baseball
Val - Course 2 senior who skis
KK - course 2 senior and plays softball.